"Ultradyne" Receiver (Inside)
レイアウトはオリジナルと少し違います。後ろの方に見える出力トランス
は、昔、東芝のテレビからはずしたもので、引出し線のビニールの被覆の
色が黒、黄、緑、赤です。OMさん方は懐かしいでしょう。ぜいたくにも
1:3 の低周波トランスが使ってあり、これが電源トランスからの磁束を拾
っているのか、ハムが出ます。 30mm のプラグインコイル用のボビンも
アメリカの Antique Electronic Supply社から買いましたが、ピンを固
定するのに、あろうことか接着剤が使ってあり、はんだ付けの熱ですぐ
にグラグラになってしまいました。
なお、1:3 の低周波トランスを使わずに済ませたい方には、「初歩のラ
ジオ」 1972 年 5月号の松下電器のページに出ている回路があります。
Luxuriously(?), a 1:3 audio transformer is used. Probably
this transformer seems to pick up the leakage flux from the power
transformer and I hear hum. I bought the 1:3 transformer and
some plug-in coil forms from Antique Electronic Supply. It seems
that pins of the coil forms I bought are fixed to the base with
help of an adhesive which easily melt with heat from a soldering
iron. I did not wind a coil for the BC band and used an antenna
coil for a 5-tube superhet. I needed to add a cathode tap between
the grid terminal and earth terminal.